Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 72)

4.4 Expansion cards
4 Function Description
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-40
4.4 Expansion cards 4400 Expansion cards 4- 4.4.1 Expansion card PMCprotego S1, PMCprotego S2
Expansion card PMCprotego S1, PMCprotego S2 4- ][Funktion_Erw_protego_S
The expansion cards PMCprotego S1 and PMCprotego S2 are available
as accessories.
Funkt_Uebersicht_allg
The safety card monitors safety functions in accordance with EN 61800-
5-2. It monitors safe motion sequences on drives, which are safely
brought to a stop and shut down in the event of an error.
The safety card is built into a servo amplifier PMCprotego D. This con-
verts the servo amplifier into a safe servo amplifier.
][Funktion_Erw_protego_S_INFO
4.4.2 Expansion card I/O-14/08
Expansion card I/O-14/08 4- ][Funktion_Erw_I_O_14_8_protego_D
The expansion card I/O-14/08 is available as an accessory.
Functions:
` 14 additional digital inputs and 8 digital outputs
` The function of the inputs and outputs can be configured in the com-
missioning software.
` The inputs initiate the motion tasks that are stored in the servo ampli-
fier.
` The outputs signal the status of the integrated position controller to
the higher level control system.
` The functions of the inputs and outputs correspond to the functions
that can be assigned to the digital inputs and outputs on connector
X3 of the servo amplifier.
` The inputs and outputs are isolated from the servo amplifier through
optocouplers.
Fig. 4-12: Front view of expansion card I/O-14/08
INFORMATION
Detailed information about the function range can be found in
the operating manuals for the PMCprotego S1 and
PMCprotego S2.