Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 125)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-21
6.7 Control element
6 Wiring
6.7 Control element 6700 Control element 6- 6.7.1 Supply voltage 24 VDC
Supply voltage 24 VDC 6- ][Verdr_Leiterquerschnitte_Verweis
Under “Connection cables”, please note the requirements for the:
` Cable cross sections
` Insulation material
Verdr_Versorgung_Warnung
][Verdr_Versorgung_24_V_protego_D
WARNING!
Electric shock!
Safe electrical isolation must be ensured for the external power
supply that generates the supply voltage. Failure to do so could
result in electric shock. The power supplies must comply with
EN 60950-1, 05/2006, EN 61558-2-6, 11/1997.
Connector pin assignment
Connector X4A/X4B Pin Designation Description
1 +24 V Supply voltage + 24 VDC
2 XGND Earth for supply voltage
4 +24 V Supply voltage + 24 VDC
Connection
Connected internally:
Pin 1 and 4 (24 V)
24 V connection isolated from exter-
nal power supply, e.g. with isolating
transformer
Noise suppression filters integrated
within the servo amplifier
X4A
+24 V 1
XGND 2
X4B
4 +24 V
5
6
4
L3
1
PMCprotego X4A
L1
L2
2
X4B
+24 V
XGND PE
+24 V
+24 V