AMT Datasouth Journey II - Manual (Page 91)

81
AEA Data – Error Messages Description and Corrective Action
On line: Invalid Command
ERR2…
This message indicates the printer
received an invalid AEA command from
the host. The second line of the display
identifies the AEA error category
(ERR2) followed by the invalid
command.
This error is displayed for informational
purposes only. The printer remains fully
functional and does not require any user
intervention.
Subsequent AEA errors will replace the
existing display message. The last AEA
error will remain in the display until
either power is removed from the unit or
the user presses the RESET key to clear
the message.
On line: Invalid Data
ERR3…
This message indicates the printer
received invalid AEA ticket data from
the host. The second line of the display
identifies the AEA error category
(ERR3) followed by the invalid data.
This error is displayed for informational
purposes only. The printer remains fully
functional and does not require any user
intervention.
Subsequent AEA errors will replace the
existing display message. The last AEA
error will remain in the display until
either power is removed from the unit or
the user presses the RESET key to clear
the message.