AMT Datasouth Journey II - Manual (Page 115)

105
C.2 Changing Features in a Profile
Feature settings in a profile may be changed through the keypad by following
the steps below.
Selecting and loading a profile (even the profile in current use)
returns all features to the factory default settings!
Changing Features:
1. Press the ON LINE/MENU key to take the printer Off line.
2. Press the PROFILE key to select the profile being changed.
3. Press the ENTER key to load the selected profile.
Figure C-2. Changing Features in a Profile
4. Press the FEATURE з
з key or FEATURE и и key to scroll the display
until you reach the feature to be changed.
5. Press the SETTINGS й
й key or SETTINGS к к key to scroll the display
until you reach the value you wish to set.
6. Press the ENTER key to activate and store the new value.
7. Repeat steps 4 through 6 as necessary until all features are correctly set for
your application. You must press the ENTER key to save selections before
selecting a new feature.
8. Press the ON LINE/MENU key to exit Setup Mode.
PROFILE
KEYS
ENTER
KEY
FEATURE
KEYS
SETTINGS
KEYS