AMT Datasouth Journey II - Manual (Page 58)

48
Jam Zone 3
If the printer has a coupon jam in ZONE 3, the following message appears in
the display:
To recover from this condition:
1. Unlock and open the BIN 1 ACCESS DOOR.
2. Slide the green ZONE 3 door latch to open the ZONE 3 ACCESS DOOR
(also open the ZONE 2, ZONE 1, and OUTPUT BIN locked door if
necessary, depending on the position of the jam).
3. Clear the coupon from ZONE 3 (and the remainder of the coupon path if
required).
4. Firmly close the ZONE 3 ACCESS DOOR, making sure that the metal
latch is fully closed and engaged (and the other access doors if required).
5. Close and lock the BIN 1 ACCESS DOOR.
6. Press the RESET/CLEAN key.
Figure 4-8. ZONE 3
O n l i n e : J a m Z o n e 3
P r e s s R E S E T t o C o n t i n u e
ZONE 3
METAL
CATCHES
ZONE 3
ZONE 3
DOOR
LATCH
TO
UNLOCK
ZONE 3
DOOR
LATCH