AMT Datasouth Journey II - Manual (Page 57)

47
Jam Zone 2
If the printer has a coupon jam in ZONE 2, the following message appears in
the display:
To recover from this condition:
1. Unlock and open the BIN 1 ACCESS DOOR.
2. Open the ZONE 2 ACCESS DOOR (and the OUTPUT BIN locked door if
necessary).
3. Clear the coupon from ZONE 2 (and the OUTPUT BIN and REJECT BIN if
necessary).
4. Close the ZONE 2 ACCESS DOOR (and the OUTPUT BIN DOOR if
necessary). Press firmly on the ZONE 2 ACCESS DOOR to ensure the
latches catch and the door is firmly seated in-place.
5. Close and lock the BIN 1 ACCESS DOOR.
6. Press the RESET/CLEAN key.
Figure 4-7. ZONE 2
O n l i n e : J a m Z o n e 2
P r e s s R E S E T t o C o n t i n u e
ZONE 2
ACCESS
DOOR