AMT Datasouth Journey II - Manual (Page 112)

102
Disk Drive Test Mode Messages Description of Message
Not enough disk space
Press RESET to Continue
This message indicates there is not
enough room on the diskette to save the
program file.
This error can occur when:
•
The size or the program file exceeds
the free space available on the floppy
diskette.
To correct this error:
1. Press the RESET key to terminate the
test.
2. Insert a good diskette into the Floppy
Disk Drive.
File System Error
Press RESET to Continue
This message indicates the printer
detected an error while accessing the
floppy disk drive.
This error can occur when:
•
The floppy disk is bad.
•
The floppy disk drive power or data
cable fails or is not connected
properly.
•
The floppy disk drive or PCB
component fails.
To correct this error:
1. Press the RESET key to terminate the
test.
2. Insert a good diskette into the Floppy
Disk Drive.
3. If this error continues, power the unit
off and check internal cable
connections.