4 updating the printer software, Reset/clean – AMT Datasouth Journey II User Manual

Page 37

Text mode
Original mode

2.4 Updating the Printer Software

A 3.5 inch front mounted floppy disk drive is used for internal printer software
upgrades (firmware upgrades). The data format used is DOS compatible.

To update the firmware:

1. Insert the software upgrade disk.
2. Press the ON LINE/MENU key to place the printer Off line.
3. Press the SOFTWARE LOAD key.
4. The following message appears:

5. Press the ENTER key to begin the software download (or press the

RESET/CLEAN key to cancel).

6. The LCD displays the status of the upgrade.

7. Reload PECTABS after the software download.

SOFTWARE LOAD

Figure 2-3. Reset/Clean Key

S o

w a r

o a

o m

D i

P r

e s

E N T E R

B e g i

RESET/CLEAN