AMT Datasouth Journey II - Manual (Page 117)

107
Feature Values Description
COM2: Baud Rate 1200
2400
4800
9600
14400
19200
38400
57600 This feature sets the baud rate of
data going out of the COM2
(itinerary printer port) serial
interface.
COM2: Parity None
Even
Odd This feature sets the parity of data
going out of the COM2 (itinerary
printer port) serial interface.
COM2: Data bits 7
8 This feature is used to determine
the data bits of information going
out of the COM2 (itinerary printer
port) serial interface.
COM2:
Handshaking None
DTR
XON/XOFF This feature sets the handshaking
used on the COM2 (itinerary
printer port) serial interface.
BIN 1: Top Print
Position 0
.
.
.
20 This feature adjusts the vertical
print position for BIN 1.
Adjustment is in n/203 inches (n/8
mm). Larger values move the print
image down the coupon.
BIN 1: Left Print
Position 0
.
.
.
245 This feature adjusts the horizontal
print position for BIN 1.
Adjustment is in n/203 inches (n/8
mm). Larger values move the print
image to the right on the coupon.
BIN 1: Print
Darkness +50
.
0
.
-50 This feature adjusts the print
darkness to compensate for
coupons of varying thermal
sensitivity, for BIN 1. Larger
values increase the darkness of the
printed image. Smaller values
decrease the darkness of the print
image. To extend the life of the
print head, always use the lightest
acceptable setting.