AMT Datasouth Journey II - Manual (Page 72)

62
Software Download Messages Description and Corrective Action
Drive Controller Error
Press RESET to Continue This message indicates an error occurred
on the Floppy Disk Drive Controller.
This error can occur when:
•
A PCB component fails.
To correct this problem:
1. Press the RESET key to terminate the
software download.
2. Call Service organization for help.
Disk Not Present
Press RESET to Continue
or
Press RESET, To Restore Old Software This message indicates the printer could
not access the diskette.
This error can occur when:
•
The Floppy Disk Drive is empty.
•
The diskette is removed from the
Floppy Disk Drive during a software
download process.
To correct this error:
1. Press the RESET key to terminate the
software download.
2. Insert a valid Journey II program
diskette into the Floppy Disk Drive.
File System Error
Press RESET to Continue This message indicates the printer
detected an error while accessing the
floppy disk drive.
This error can occur when:
•
The floppy disk is bad.
•
The floppy disk drive power or data
cable fails or is not connected
properly.
•
The floppy disk drive or PCB
component fails.
To correct this error:
1. Press the RESET key to terminate the
software download.
2. Obtain/create a valid Journey II
program diskette.