AMT Datasouth Journey II - Manual (Page 120)

110
Feature Values Description
Coupon Retry
Count ## 0
.
.
.
10 This feature specifies how many coupons
in succession with magnetic verify errors
will be allowed before a magnetic error
is reported.
Coupon Print
Order FIFO
LIFO This feature specifies the order in which
AEA tickets are printed. Valid values
for this feature are FIFO (First In First
Out) and LIFO (Last In First Out). This
feature is functional only during the
processing of AEA ticket commands.
This feature is not functional when ASCII
Mode printing is enabled.
Software Rev.
107652 ## N/A This feature displays the current internal
printer software.
Print Current
Settings N/A This feature is used to print a coupon
with the present settings for each feature
in the currently selected profile.
Print # Peckman
Coupons 1
.
.
.
10 This feature is used to print 1-10
coupons. These coupons can then be used
as feedback to adjust printer settings. Use
the settings keys to select the number of
coupons to print, then press the ENTER
key.
Print # Test
Coupons 1
.
.
.
10 This test prints 1-10 coupons to verify
electrical, mechanical and magnetic
operations. Use the settings keys to select
the number of coupons to print, then
press the ENTER key.
Test Bin: BIN 1
BIN 2
Alt. In/Out
Alt. Input Determines if coupons are pulled from
BIN 1 or BIN 2 during test prints. If Alt.
In/Out is selected, coupons are pulled
from both bins and are sent to both the
regular OUTPUT BIN and the REJECT
BIN. If Alt. Input is selected, coupons
are pulled from both input bins and sent
to the regular OUTPUT BIN.
To access the Hidden Features listed below: