Shell tack, Applique – Kenmore 385.19365 User Manual
Page 99
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Shell Tack
® stitch pattern:
@ Thread tension dial:
(E* F: Satin stitch foot
20
6 to 8
Use a light weight fabric such as tricot
Fold and stitch on the bias. When the needie swings to
right, aliow the needle to just dear the foided edge of the
fabric. Open the fabric and iron on one side of fabric.
Green auto thread tension light flashes on stitch 20 to
make you aware that thread tension may have to be
adjusted.
Applique
® stitch pattern:
22
(
2
) Thread tension dial;
AUTO
d) F; Satin stitch foot
0 Presser foot adjusting lever:
2
Stitch pattern 23, 24 can also be used.
Applique, a technique for stitching fabric shapes onto
another fabric, opens limitless design possibilities.
Dimension and texture can be added by lightly stuffing all
or part of design.
This machine has several different patterns that can be
used to enhance your applique.
In this type of applique, raw edges are folded under, To
finish the raw edge, cut the applique design out of
cardboard*
Fold the fabric then cut the fabric slightly larger than the
cardboard.
Fold the fabric around the cardboard and press to form a
perfectly shaped design. Tape the applique in place and
sew. guiding the si it on Satin stitch foot next to the finished
edge of the applique,
ф Applique fabric
(DSiit
® Edge
88