Mode key, Stitch width seiection, Stitch length selection – Kenmore 385.19365 User Manual
Page 25: Editing, Elongation koy, Mirror image key
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
©Mode key
By pressing the key, the LED iight moves step by step
to select the stitch mode, as shown,
[Tj Direct mode pattern selection
H] Blue mode pattern seiection using number keys
(utility and decorative stitches)
m Red mode character selection using number keys
(block type)
[?] Green mode character selection using number
keys (script type)
©Stitch width seiection
Press “4-” or to change the stitch width.
©Stitch length selection
' to change the stitch length.
©Editing
This button can be used for adding and changing
combinations and monograms before sewing while
programming stitch patterns or monograms.
For editing, use the stitch width V’ or key to select
editing position (see page 114,116).
Manual setting function of the zigzag width and stitch
length for programmed patterns.
The individual programmed zigzag pattern width or
stitch length can be changed (see page 56).
©Elongation koy
(For Blue mode stitches)
Stitches 40 to 55 can be elongated up to five times
their normal length by pressing this key
©Mirror image key
(For Blue mode stitches)
Select a desired pattern and press (T) (Mirror image
key) so the selected pattern’s mirror image will be
shown on the screen ,
Use this key to memorize and sew patterns in a mirror
image. Programmed letters or numbers will be
reduced to 2/3 of their actual size when you press the
mirror image key.