Kenmore 385.19365 - Manual (Page 109)

Twin Needle Stitch
0 Stitch Pattern: 92
(D Thread tension dial: AUTO
CD F: Satin stitch foot
* Press the ClD Twin needle button.
This machine is equipped with a twin needle that can be
used to sew parallel rows straight on decorative stitches
adding an exquisite touch to table linens and ciothing.
These stitch patterns (01, 04, 28, 31,32, 35, 40,42, 51,
52, 54, 82, 92) can aiso be used. Turn oil and unplug the
machine before changing the needle to the twin needle,
insert the additionai spool pin, and put the felt and spool on
it with the thread coming off the spool as shown.
When threading the machine for twin needie sewing follow
this chart making sure you separate the threads, ptacing
one in each thread guide on the needle bar.
® Starting to sew
Threading steps from |T] to 13 are the same as
Threading the machine (See page 38)
The additional spool thread should roll out clockwise as
shown.
H] Slide one of the threads through the needie bar
thread guide on the left and the other one on the
right.
HI Thread the needles from front to back-
[7] Turn the power switch on, select the stitch pattern
and press the twin needle stitch key.
At corners, raise the needles till they clear the fabric.
Partially raise the presser foot and carefully pivot the
fabric.
When Win needie sewing is completed, change needle
and reset tension if necessary and press twin needie
key to disenagage twin needle function.
* The needle threader cannot be used with twin
needles.
98