Drawing up the bobbin thread – Kenmore 385.19365 User Manual
Page 53
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Drawing up the Bobbin thread
lU Raise the presser foot lifter. Hold the needle thread
lightly with your left hand.
m Press the Up/Down needle position button twice to pick
the bobbin thread up by pulling the needle thread up.
® Needle thread
(I) Bobbin thread
(D Up/Down needle position button
[II
Pul!
both
threads under and
to
the back
of
the presser
foot,
leaving 4
to
6 inches (10 to 15 cm)
of
thread clear.
42