Kenmore 385.19365 - Manual (Page 23)

Main Function of Buttons
®Up/Down needle position button
When the Up/Down needle position button is pressed,
the needle bar goes down and stops in the lowest
position. When pressed again, the needle bar goes up
and stops in the highest position. .
* When this button is pressed, the needle bar
alternates up and down positions when the
machine stops.
(D Auto-lock button
It > >
When stitches «b 5^ :> are selected, the machine
will immediately sew locking stitches when the
auto-lock button is pressed, then automatically stop.
When sewing all other stitches, the machine will sew
locking stitches at the end of the current pattern and
automatically stop.
(D Reverse button
3
3
I
{
When stitches 4= :? :> are selected, the machine
win sew in reverse while the reverse button is pressed,
if you press the reverse button when sewing all other
stitches, the machine will Immediately sew locking
stitches and automaticaly stop,
0Screen sharpness adjusting dial
Use this to adjust the sharpness of the liquid crystal
display. If no indication is shown on the screen after
you switch on the power, adjust the screen brightness
with this dial.
©Language selection dial
Set the indication mark “A" to a dot “ * “ with the end of
the lint brush to select the language you need,
[j] Engiish
m Spanish
fl] French