Ss0fnl3l0 til© hook r©c, Sectioisf v care of your machine, Dogs – Kenmore 385.19365 User Manual

Page 129

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTIOISf V CARE OF YOUR MACHINE

Clean the Hook Race and Feed

Dogs

{?) Screw driver

(g) Set screw

(D Needle plate

® Lint brush

® Hook race

® Bobbin holder

® Feed dogs

® Soft, dry cloth

Press the needle Up/down needle position button to raise

the needle, then unplug the sewing machine.

Do not dismantle the machine other than explained on this

Remove the cover plate by sliding the hook cover plate

release button to the right. Take out the bobbin. Brush out

dust and lint> (You may also use a vacuum cleaner,)

Q] Remove the set screw on the left hand side of the

needle plate with the screwdriver supplied with the

machine. Remove the needle plate.

ElTake out the bobbin. Lift up the bobbin holder and

remove it,

[3] Clean the hook with a soft dry doth,

SI Clean the feed dogs and hook race with the lint brush,

Clean the center of the hook race with a dry cloth.

You may also use a vacum cleaner.

® Bobbin holder

@ Stopper

® Knob

® Needle plate guide pins

® Screwdriver

® Guide holes

Insert the bobbin holder so that the knob fits next to the

stopper in the hook race.

D Insert the bobbin,

H] Attach the needle plate with screw.

After cleaning the machine, make sure the needJe

and presser foot are attached.

118