Adjusting p3tt@rn bslorics, Aidljustinqi d!stort©ci strstch stitch psttsrns, Adjusting distorted stretch stitch patterns – Kenmore 385.19365 User Manual
Page 111
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting P3tt@rn Bslorics
If the decorative stitch patterns, ietters, numbers or manual
buttonhole stitch are uneven when you sew on a particular
fabric, adjust them with the feed balancinQ dial.
*■ The machine is set with the feed balancing dial position
with the setting mark as shown.
0 Feed balancing dial
® Standard setting mark
«D Indication line
AidljustinQi D!stort©ci Strstch Stitch Psttsrns
If the patterns are uneven when sewing with a particular
fabric, adjust them by turning the feed balancing dial with a
coin.
When patterns are too compressed, correct by turning the
dial in the direction of
When patterns are too drawn out, correct by turning the
dial in the direction of
Adi'usting Distorted Letters or Numbers in
Red or Qreen Mode
If the letters are uneven when sewn on a particular fabric,
seiect pattern 8 to test the stitch then turn the feed
baiancing dial with a coin.
When the letters or numbers overlap, turn the dial to
When the ietters or numbers are too drawn out, turn the
dial to
too