Zipper sewing continued) – Kenmore 385.19365 User Manual
Page 89
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(Zipper Sewing continued)
lU Sew through all layers next to the fold. Stop just before
the zipper foot reaches the slider on the zipper tape
(about 2” (Scin)). Lower the needle slightly into the
fabric. Raise the zipper foot and open the zipper.
Lower the foot and stitch the remainser of the seam.
® Slider
2" (5cm) ] Close the zipper and spread the fabric fiat wtih the right side facing up. Baste the opened fabric and zipper tape together (4| Basting stitch ® Right side of fabric ® Zipper tape ] Move the zipper foot to the left pin. Guide the edge of the foot along the zipper teeth and stitch through the garment and zipper tape Stop about 2” (5 cm) from the top of the zipper. Lower the needle silghtiy into the fabric, raise the foot, remove the basting stitches along the zipper opening. Open the zipper to move the slider behind the zipper foot I Lower the foot and stitch the remainder of the seam, making sure the fold is even.