Leica Geosystems Leica mojo3D - User Manual User Manual

Page 91

Leica mojo3D, Setting Guidance Types

Importing waylines
from mojo3D files,
step-by-step

To import waylines from mojo3D files, carry out the following steps:

1. The USB interface is on the lower left front of the

mojo3D display. Lift the rubber cover and insert a
compatible USB Flash Drive which contains wayline
data into the USB slot.

2. On the main navigation screen, tap the settings button.

3. On the flyout menu, tap the transfer data button.

4. Tap the import from USB button and tap

to continue.

mojo3D_010