Leica Geosystems Leica mojo3D - User Manual User Manual

Page 350

350

Leica mojo3D, mojo3D Enhancements

• If Internal Radio or External Radio is selected, the Correction Source Status

screen appears indicating the success or failure of the connection. Tap the

button to proceed to the Enable GL1DE

Fallback screen.

• If Network RTK is selected, further configuration is required and this is

explained in "10.4 Network RTK". Then the Correction Source Status screen

appears indicating the success or failure of the connection. Tap the

button to proceed to the Enable GL1DE

Fallback screen.

• If GL1DE

Only is selected, no extra configuration is required, and the

Antenna Separation/Vehicle Height/Red Antenna Offset screen appears (step

button is tapped.

59. On the Enable GL1DE

Fallback screen the operator can choose to have the

system use the GL1DE

correction source in the event that their chosen correc-

tion source fails, by tapping the Enable GL1DE

Fallback box so it turns green.

• GL1DE

Fallback Time Limit is the time in minutes that the system will use the

GL1DE

correction source. If the originally configured correction source has

not come back online in this time period, then auto-steer is disabled.

• Drift Limit - if the originally configured correction source comes back online

and the drift from the wayline is less than this value (in metres) then auto-