Leica Geosystems Leica mojo3D - User Manual - Manual (Page 72)

72 Leica mojo3D, Setting Guidance Types
4.3 Fixed Contour Guidance
General informa-
tion
Setting fixed
contour guidance,
step-by-step To set up fixed contour guidance, carry out the following steps:
In fixed contour guidance, working lines are parallel
curves, and are set by defining an initial contour
with a beginning and an ending waypoint.

Before you can set waypoints, the
system must have a good position fix.
1. On the main navigation screen, tap the guidance button.
2. On the flyout menu, tap the fixed contour guidance button.