Leica Geosystems Leica mojo3D - User Manual - Manual (Page 364)

364 Leica mojo3D, mojo3D Enhancements
A.5 Redeeming a System Option Voucher
Benefits Software options for the mojo3D are available as a voucher. This reduces the
complexity at time of ordering if the customer information or serial numbers are not
available.
General informa-
tion Software options provided on the mojo3D can be enabled by purchasing a voucher.
Enable the feature by entering the voucher on
http://www.virtualwrench.com/redeem along with the serial number of the device. A
device specific code will be generated which can be entered onto the mojo3D to
unlock the feature.
Redeem voucher To redeem a system option voucher, carry out the following steps:
1. Record the device serial number
which can be found on the back on
the mojo3D.

The serial number is the six
digit article number with a dot
followed by the serial.
For example: 777533.000001
Art: 777533 Made in Singapore
S/N: 000001 Manuf.: 1210
mojo3D HSDPA Unit
GeoPRO_005