4 setting guidance types, 1 ab parallel guidance, Setting guidance types – Leica Geosystems Leica mojo3D - User Manual User Manual

Page 68: Ab parallel guidance, 4setting guidance types

Leica mojo3D, Setting Guidance Types

Setting Guidance Types

Waypoints

Waypoints are used to define a line in the field to which all working lines will be
parallel. Waypoints must be set before auto-steer can be used.

4.1

AB Parallel Guidance

General informa-
tion

Setting waypoints,
step-by-step

To set AB waypoints, carry out the following steps:

In AB Parallel guidance, working lines are parallel,
and are set by defining an initial waypoint and an
endpoint.



Before you can set waypoints, the
system must have a good position fix.

1. On the main navigation screen, tap the guidance button.