Leica Geosystems Leica mojo3D - User Manual - Manual (Page 181)

Leica mojo3D, Vehicles and Implements 181
9.2 Load a Vehicle or Implement Configuration
General Informa-
tion If there are vehicle or implement configurations saved on the mojo3D, then they can
be reloaded so the user does not have to re-enter the details of the configuration.

It is up to the operator to confirm that the correct configuration is loaded
and that the settings are correct. The system cannot detect if incorrect
settings have been loaded.
Loading a vehicle
or implement
configuration,
step-by-step To load a vehicle or implement configuration, carry out the following steps:
1. On the main navigation screen, tap the settings button.