4 testing auto-steer, Testing auto-steer – Leica Geosystems Leica mojo3D - User Manual User Manual

Page 123

Leica mojo3D, Auto-Steer

123

5.4

Testing Auto-Steer

Testing the auto-
steer function,
step-by-step

To perform a test on the auto-steer function, carry out the following steps:

1. On the main navigation screen, tap the auto-steer settings

button.

2. On the flyout menu, tap the auto-steer test button.

The Configure Steering Kit screen, shown below, appears.