Leica Geosystems Leica mojo3D - User Manual - Manual (Page 62)

62 Leica mojo3D, Running the mojo3D for the First Time
3.12 Vehicle Setup
General informa-
tion Vehicle setup includes:
•
Vehicle & Implement setup
• Section controller and Implement mode selection
• Master Input & Input Mode selection
• Swath and Section control setup
Vehicle setup,
step-by-step To select and change one of these items, carry out the following steps:

All changes are automatically saved as they are made.
1. On the main navigation screen, tap the Settings button.
2. On the flyout menu, tap the Vehicle setup button.
3. Tap to continue through the vehicle setup wizard. Make any changes that
are required.

For specific information on the different settings refer to "3.3 Initial Setup
Wizard".