Leica Geosystems Leica mojo3D - User Manual - Manual (Page 221)

Leica mojo3D, Correction Sources 221
10.5 RTK Base Station (Internal Radio)
Overview A mojo3D system connected to a mojoXact/mojoXact Plus can utilise a local base
station for position data.

The RTK Base Station correction source is not available in Russia.
Enabling RTK Base
Station, step-by-
step The mojo3D must be configured with a mojoXact/mojoXact Plus attached.
To enable RTK Base Station, carry out the following steps:
1. At the main navigation screen, tap the settings button.
2. On the flyout menu tap the correction source button.
The Correction Source screen appears.