Leica Geosystems Leica mojo3D - User Manual - Manual (Page 46)

46 Leica mojo3D, Running the mojo3D for the First Time
Correction source
configuration,
step-by step 1. On the Correction Source screen, select the correction source to use for your
system.
2. Tap to continue.
• If Network DGPS is selected, further configuration is required and this is
described in "10.1 Network DGPS". Once the configuration is complete, the
NMEA Configuration screen displays.
• If GL1DE
TM
Only is selected, no extra configuration is required, so the NMEA
Configuration screen displays when the button is tapped.
NMEA configura-
tion

If NMEA output is not required tap to complete the initial setup.

If NMEA output is required from the mojo3D, follow the detailed informa-
tion in "11 NMEA Output".