Leica Geosystems Leica mojo3D - User Manual - Manual (Page 104)

104 Leica mojo3D, Auto-Steer
Preconditions to
engage auto-steer The conditions required for auto-steer to engage will depend on the steer kit being
used. The following is a typical example of the conditions required to be met before
automatic steering can occur:
•
Auto-steer correctly connected and configured
• Roading off
• Wayline set
• Distance to wayline less than 6 m (20 ft)
• Heading within 45 degrees of wayline
• Travelling faster than 1 km/h (0.6 mph)
• Not travelling faster than 30 km/h (18 mph)
Engage auto-steer
2. The auto-steer button will turn green to indicate auto-steer is engaged and the
vehicle is being automatically steered.

Other methods to engage the steering will be available and this method will
depend on the steer kit used.
1. On the main navigation screen, tap the auto-steer button when it
is yellow.