Leica Geosystems Leica mojo3D - User Manual - Manual (Page 212)

212 Leica mojo3D, Correction Sources
Configuring
GL1DE
TM
as the
only correction
source, step-by-
step
To configure GL1DE
TM
as the only correction source, carry out the following steps:
When the mojo3D is using GL1DE
TM
, the GL1DE
TM
icon similar to displays on
the Status button of the main navigation screen.
1. At the main navigation screen, tap the settings button.
2. On the flyout menu tap the correction source button.
The Correction Source screen appears.
3. In the Correction Source list, tap on
the GL1DE
TM
Only button to select
it.
4. Tap the button and you are returned to the main navigation screen.