Leica Geosystems Leica mojo3D - User Manual - Manual (Page 211)

Leica mojo3D, Correction Sources 211
10.3 GL1DE
TM
Overview GL1DE
TM
can be used in two ways by the mojo3D. The first is to use GL1DE
TM
as the
only correction source. The second is to use GL1DE
TM
as a fallback when the signal
to the configured correction source (such as Network DGPS, Network RTK or RTK
Base Station (Internal Radio)) is lost. The loss of signal may be due to terrain, vege-
tation or interference.
The mojo3D must be receiving GPS data for GL1DE
TM
to be enabled.