Leica Geosystems Leica mojo3D - User Manual - Manual (Page 222)

222 Leica mojo3D, Correction Sources
3. In the Correction Source list, tap on
the Internal Radio button to select
it.
The Channel and Reference Format
lists appear.
4. In the Channel list, tap the button of
the channel that is configured for
the base station.
5. In the Reference Format list tap the
button of the format that is config-
ured for the base station.
6. Tap the button.
7. If all details are entered correctly,
the system attempts to connect to
the correction source. This may take
some time and if successful the
Correction Source Status screen
appears with a in front of
Correction Source Status.