Leica Geosystems Leica mojo3D - User Manual - Manual (Page 111)

Leica mojo3D, Auto-Steer 111
5.2.4 Overshoot
Setting the over-
shoot The overshoot value will control the rate at which the vehicle will drive at the line and
the rate that the vehicle will round off as it approaches the line. A low value will cause
the vehicle to hold off the line longer while a high value will cause the vehicle to
converge quickly and possibly drive past the line.
2. Adjust the slider to vary the overshoot, by using the and .
Explanation • The overshoot can be set between 50% and 150%. The standard setting is 100%.
1. On the tuning screen, tap the overshoot button.
• Different overshoot settings and their
approach to the working line:
150%
100%
50%
mojoRTK_013