Leica Geosystems Leica mojo3D - User Manual - Manual (Page 61)

Leica mojo3D, Running the mojo3D for the First Time 61
3.11 Changing System Settings
General informa-
tion The system settings includes:
Changing settings,
step-by-step To select and change one of these items, carry out the following steps:

All changes are automatically saved as they are made.
• Screen brightness
• Country
• Language
• Time offset
• Measure units (length, speed & area)
• Top down mode
• Display (day/night) mode
• Cell modem setup,
1. On the main navigation screen, tap the Settings button.
2. On the flyout menu, tap the system settings button.
3. Tap to continue through the system settings wizard. Make any changes that
are required.

For specific information on the different settings refer to "3.3 Initial Setup
Wizard".