3 running the mojo3d for the first time, 1 starting up, Running the mojo3d for the first time – Leica Geosystems Leica mojo3D - User Manual User Manual

Page 32: Starting up, 3running the mojo3d for the first time

Text mode
Original mode

Leica mojo3D, Running the mojo3D for the First Time

Running the mojo3D for the First Time

3.1

Starting Up

Starting up,
step-by-step

1. To start the mojo3D, press and hold the

power button

for two seconds.

2. The splash screen

appears on the mojo3D display, and is

replaced by the warning signs screen, shown below.
The warning signs are to communicate to the operator that:
• riding on the machine is only allowed on a passenger seat,
• the User Manual must have been read prior to operation and
• to keep a safe distance away from people and other hazards.
The startup progress bar at the bottom of the screen indicates the progress of
the system initialisation procedure.