Leica Geosystems Leica mojo3D - User Manual - Manual (Page 353)

Leica mojo3D, mojo3D Enhancements 353
64. Turn the vehicle around through 180°, and stop in exactly the same position as
before and tap the grey square button.
65. Wait until the further tuning of the inertial sensors is complete, as shown by the
progress bar, and then tap to continue. The mojoXact Orientation screen
appears.
66. At the mojoXact Orientation screen enter the Orientation of the mojoXact by
tapping the or until the correct orientation is displayed. The mojoXact
(in the image) will rotate to help with entering the correct value.