Leica Geosystems Leica mojo3D - User Manual - Manual (Page 191)

Leica mojo3D, Vehicles and Implements 191
9.5 Exporting Vehicle or Implement Configurations
Exporting vehicle
or implement
configurations,
step-by-step

When you export vehicle configurations to a USB memory key, you will
overwrite any vehicle configurations that may already be on the USB
memory key.

Refer to "Appendix B Formatting USB Flash Drives" for important informa-
tion about using USB memory keys with the mojo3D products.

Do not turn off the mojo3D, or remove the USB memory key, while the data
export is under way.
To export vehicle or implement configurations, carry out the following steps:
1. The USB interface is on the lower left front of the
mojo3D display. Lift the rubber cover and insert a
compatible USB memory key into the USB slot.
mojo3D_010