Pilz PSENvip RL D P - Manual (Page 93)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-9
7.2 Initial commissioning
7 Commissioning
7.2.1.6 Align receiver
Align receiver 7- Inbetriebnahme_Erstinbetriebnahme_Empfaenger_ausrichten_1
 Attach an adjustment template with magnets to the upper tool. The tip
of the upper tool must sit in the notch on the stop of the adjustment
template.
Align the alignment grid of the adjustment template to the contour of
the upper tool.
Fig. 7-6: Attach the adjustment template to the receiver
 Press the key.
 Using the keys , select the Adjustment option.
 Press the key to open the Adjustment option.
Inbetriebnahme_Winkelmessung_Hinweis
Inbetriebnahme_Erstinbetriebnahme_Empfaenger_ausrichten_Justagebild_1
INFORMATION
The tool must be aligned to the central bending line if bending
angle measurement is to be used.
Align the
alignment grid
on the upper
tool
Centre point of
the upper tool
in the notch on
the back stop