Pilz PSENvip RL D P - Manual (Page 35)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-7
4.2 Protected field
4 Function Description
4.2.2 Standard interrupted press stroke
Standard interrupted press stroke 4- Funktion_Pressenhub_mit_Unterbrechung
Action of the protected field during an interrupted press stroke:
5
Upper tool strikes the workpiece
6
Bending process
The bending process is complete
once bottom dead centre has been
reached. Upper die travels upwards.
1
Initial status: The press is at top dead
centre. The operator initiates a press
stroke with the foot switch. The pro-
tected field is clear.
2
Rapid traverse: Upper tool (upper die)
moves with a fast closing speed (rapid
traverse >10 mm/s). Programmable
safety system initiates the braking
process. The protected field is clear.