Pilz PSENvip RL D P - Manual (Page 69)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
5-1
5.1 General requirements
5 Installation
55000 Installation Installation 5- 5.1 General requirements 5100 General requirements 5- Montage_Allgemeine_Anforderungen
Please note for installation:
 The PSENvip may only be installed by qualified personnel.
 The environmental data for the PSENvip must be taken into account.
Details are available in the chapter entitled “Technical Details”.
 The transmitter and receiver should be installed with the respective
front lenses aligned in parallel to each other.
 The distance between the transmitter and receiver may not be greater
than the value stated in the "Technical Details".
CAUTION!
Ensure that the field of vision of the front lenses on the transmit-
ter and receiver is not restricted. Do not attach any other optical
elements such as glass/plastic surfaces, films or lenses.
 Check the fastening of the PSENvip at regular intervals.
 Check that the fastening of the PSENvip is not accidentally
working its way loose as a result of vibration from the press
brake.