Pilz PSENvip RL D P - Manual (Page 131)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
10-1
10.1 Overview
10 System Connections
10 10000 System Connections System Connections 10- 10.1 Overview 10100 Overview 10- Systemanbindung_Uebersicht_PSS_PNOZmulti
This chapter provides information on how to connect the PSENvip to a
safety system.
The overview describes the general connections, independent of any
specific control system. The sections that follow will then deal with the
connection to specific Pilz control systems:
 Programmable safety system PSS
 Modular safety system PNOZmulti
The signals between the PSENvip and programmable safety system are
described in this chapter.
Signals to the safety system:
 OSSD1/OSSD2
 Overrun measurement
Signals from the safety system:
 Protected field mode 1/protected field mode 2
 Power Off
Systemanbindung_Uebersicht_Achtung
INFORMATION
The following examples are intended to help you to:
- Set parameters for the standard function blocks and incorpo-
rate them into the PSS user program.
- Configure the application in the PNOZmulti Configurator.
These settings and parameters should be regarded as example
settings. It's possible that your own specific application may
require different settings or parameters under certain circum-
stances.