Pilz PSENvip RL D P - Manual (Page 115)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
8-1
8.1 Safety guidelines
8 Operation
88000 Operation Operation 8- 8.1 Safety guidelines 8100 Safety guidelines 8- Betrieb_Sicherheitshinweise_Einl
Please note the following safety safety guidelines during operation:
Sicherheit_Warnung_Quetschen_2
Betrieb_Sicherheitshinweise_Pruefungen
Prior to operation
:
Carry out the daily checks on the protective equipment prior to opera-
tion (see Chapter 7, "Commissioning", section entitled “Function test of
the safety device").
WARNING!
Crushing and trapping of fingers or hands!
The protected field is inactive when the press is in creep speed
mode. This means that the PSENvip will not protect against
rapid encroachment between the upper and lower tool shortly
before these close.
Make sure that the workpiece is handled correctly (see
Chapter 3, "Safety").