Pilz PSENvip RL D P - Manual (Page 38)

4.3 Overrun
4 Function Description
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-10
WARNING!
The overrun measurement signal must be incorporated into the
user program for the press in such a way that the measurement
is effective in terms of the respective requirements of the
machine's safety concept, e.g. it must be run when the control-
ler is switched on, so that the initial stroke on starting the
machine is a test stroke. Further information is available in
Chapter 7, "Commissioning", under "Function test of the safety
device".
It is the duty and responsibility of the user to select and apply an
appropriate safety concept.