Show vlan filter – Dell POWEREDGE M1000E User Manual
Page 711
2-681
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show vlan filter
show vlan filter
Use the show vlan filter privileged EXEC command to display information about all VLAN filters or
about a particular VLAN or VLAN access map.
show vlan filter [access-map name | vlan vlan-id] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show vlan filter command:
Switch# show vlan filter
VLAN Map map_1 is filtering VLANs:
20-22
Related Commands
access-map name
(Optional) Display filtering information for the specified VLAN access map.
vlan vlan-id
(Optional) Display filtering information for the specified VLAN. The range is
1 to 4094.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
Displays information about a particular VLAN access map or for all
VLAN access maps.
Creates a VLAN map entry for VLAN packet filtering.
Applies a VLAN map to one or more VLANs.