Ip dhcp snooping trust – Dell POWEREDGE M1000E User Manual
Page 245
2-215
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
ip dhcp snooping trust
ip dhcp snooping trust
Use the ip dhcp snooping trust interface configuration command on the switch stack or on a standalone
switch to configure a port as trusted for DHCP snooping purposes. Use the no form of this command to
return to the default setting.
ip dhcp snooping trust
no ip dhcp snooping trust
Syntax Description
This command has no arguments or keywords.
Defaults
DHCP snooping trust is disabled.
Command Modes
Interface configuration
Command History
Usage Guidelines
Configure as trusted ports those that are connected to a DHCP server or to other switches or routers.
Configure as untrusted ports those that are connected to DHCP clients.
Examples
This example shows how to enable DHCP snooping trust on a port:
Switch(config-if)# ip dhcp snooping trust
You can verify your settings by entering the show ip dhcp snooping user EXEC command.
Related Commands
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
Displays the DHCP snooping configuration.
Displays the DHCP snooping binding information.