Dell POWEREDGE M1000E User Manual
Page 70
2-40
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
authentication priority
This example shows how to set MAC authentication Bypass (MAB) as the first authentication method
and web authentication as the second authentication method:
Switch(config)# authentication priority mab webauth
You can verify your settings by entering the show authentication privileged EXEC command.
Related Commands
Command
Description
authentication
control-direction
Configures the port mode as unidirectional or bidirectional.
Sets the action for specific authentication events.
Configures a port to use web authentication as a fallback method for clients
that do not support IEEE 802.1x authentication.
Sets the authorization manager mode on a port.
Enables or disables open access on a port.
Sets the order of authentication methods used on a port.
Enables or disables reauthentication on a port.
Enables manual control of the port authorization state.
Configures the timeout and reauthentication parameters for an
802.1x-enabled port.
Configures the violation modes that occur when a new device connects to a
port or when a new device connects to a port after the maximum number of
devices are connected to that port.
mab
Enables MAC authentication bypass on a port.
mab eap
Configures a port to use Extensible Authentication Protocol (EAP).
Displays information about authentication manager events on the switch.