Dell POWEREDGE M1000E - Manual (Page 171)

2-141
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
dot1x pae
dot1x pae
Use the dot1x pae interface configuration command on the switch stack or on a standalone switch to
configure the port as an IEEE 802.1x port access entity (PAE) authenticator. Use the no form of this
command to disable IEEE 802.1x authentication on the port.
dot1x pae authenticator
no dot1x pae
Syntax Description This command has no arguments or keywords.
Defaults The port is not an IEEE 802.1x PAE authenticator, and IEEE 802.1x authentication is disabled on the
port.
Command Modes Interface configuration
Command History
Usage Guidelines Use the no dot1x pae interface configuration command to disable IEEE 802.1x authentication on the
port.
When you configure IEEE 802.1x authentication on a port, such as by entering the dot1x port-control
interface configuration command, the switch automatically configures the port as an EEE 802.1x
authenticator. After the no dot1x pae interface configuration command is entered, the Authenticator
PAE operation is disabled.
Examples This example shows how to disable IEEE 802.1x authentication on the port:
Switch(config-if)# no dot1x pae
You can verify your settings by entering the show dot1x or show eap privileged EXEC command.
Related Commands
Release Modification
12.2(40)EX1 This command was introduced.
Command Description
show dot1x Displays IEEE 802.1x statistics, administrative status, and
operational status for the switch or for the specified port.
show eap Displays EAP registration and session information for the
switch or for the specified port.