Dell POWEREDGE M1000E - Manual (Page 101)

2-71
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
clear dot1x
clear dot1x
Use the clear dot1x privileged EXEC command on the switch stack or on a standalone switch to clear
IEEE 802.1x information for the switch or for the specified port.
clear dot1x {all | interface interface-id}
Syntax Description
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Usage Guidelines You can clear all the information by using the clear dot1x all command, or you can clear only the
information for the specified interface by using the clear dot1x interface interface-id command.
Examples This example shows how to clear all IEEE 8021.x information:
Switch# clear dot1x all
This example shows how to clear IEEE 8021.x information for the specified interface:
Switch# clear dot1x interface gigabithethernet1/0/1
You can verify that the information was deleted by entering the show dot1x privileged EXEC command.
Related Commands
all Clear all IEEE 802.1x information for the switch.
interface interface-id Clear IEEE 802.1x information for the specified interface.
Release Modification
12.2(40)EX1 This command was introduced.
Command Description
show dot1x Displays IEEE 802.1x statistics, administrative status, and operational
status for the switch or for the specified port.