Mkdir – Dell POWEREDGE M1000E User Manual
Page 905
A-19
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix A Cisco Catalyst Blade Switch 3130 and 3032 for Dell Boot Loader Commands
mkdir
mkdir
Use the mkdir boot loader command to create one or more new directories on the specified file system.
mkdir filesystem:/directory-url ...
Syntax Description
Command Modes
Boot loader
Command History
Usage Guidelines
Directory names are case sensitive.
Directory names are limited to 45 characters between the slashes (/); the name cannot contain control
characters, spaces, deletes, slashes, quotes, semicolons, or colons.
Examples
This example shows how to make a directory called Saved_Configs:
switch
: mkdir flash:Saved_Configs
Directory "flash:Saved_Configs" created
This example shows how to make two directories:
switch
: mkdir flash:Saved_Configs1 flash:Test
Directory "flash:Saved_Configs1" created
Directory "flash:Test" created
You can verify that the directory was created by entering the dir filesystem: boot loader command.
Related Commands
filesystem:
Alias for a flash file system. Use flash: for the system board flash device.
/directory-url
Name of the directories to create. Separate each directory name with a space.
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
Displays a list of files and directories on the specified file system.
Removes one or more directories from the specified file system.